How much does stamped concrete cost in Georgia?

Stamped concrete runs about $8 to $20 a square foot installed in most national cost guides. Complex designs with hand-tooled detail can reach $28 or more. One national cost guide’s Atlanta page lists $9 to $30 a square foot, with typical projects at $2,663 to $5,940. Plain gray concrete with a broom finish runs about $5 to $8 in one national concrete guide.

These are market numbers, not our price list. Every guide here is national, and one of them publishes an Atlanta-area page. Georgia Premier Contracting Group pours stamped and decorative concrete for homes in Monroe and the towns around it. This guide covers what moves the price.

What does each concrete finish cost per square foot?

Cost guides price decorative concrete by the square foot, with labor and materials included. This table pulls from three national guides and one Atlanta-area page.

The national concrete guide ranks a broom finish as the least costly patio finish. Exposed aggregate is a step up, and stamped concrete costs the most. The same guide’s basic driveway tier covers one coloring method or an exposed aggregate finish.

Two or more colors or patterns put a driveway in the mid-range tier, $14 to $21 a square foot. A stamped border around a plain broom field costs less than stamping the whole slab, the same guide notes.

What does a stamped concrete patio cost?

One national cost guide prices a 20 by 20 foot stamped patio at $3,200 to $7,600. That is 400 square feet. A plain concrete patio that size runs $1,600 to $4,800 in the same publisher’s patio guide.

The national concrete guide uses an average patio of about 288 square feet. At that size, a basic stamped patio runs $2,880 to $4,032. A design with borders and more color runs $4,032 to $5,760.

The Atlanta-area page lists a 100 square foot stamped patio at $900 to $3,000. Small jobs often cost more per square foot, since some contractors set a minimum charge. We pour concrete patios in plain and stamped finishes, with the color and pattern set in the same pour.

What does a stamped concrete driveway cost?

The national concrete guide uses a typical two-car driveway of 16 by 40 feet, or 640 square feet. A basic stamped driveway that size runs $6,400 to $8,960. A mid-range design runs $8,960 to $12,800.

Another national guide prices a 24 by 24 foot stamped driveway at $6,900 to $10,400. The Atlanta-area page lists a 500 square foot stamped driveway at $4,500 to $15,000.

Tearing out an old driveway adds to any of these. National guides list removal at about $1 to $8 a square foot, and disposal can add more. More than a third of Monroe’s homes were built before 1970, Census estimates show. At older homes, an old slab often has to come out first.

Permits are part of the cost too. In unincorporated Walton County, a driveway onto a county road needs a county driveway permit first. The county fee schedule lists it at $75. Inside Monroe city limits, ask the City of Monroe Code Department before you build.

Monroe’s zoning code caps hard surfaces at 60 percent of a lot outside the downtown overlay, and driveways count. Concrete driveways can pair a broom field with a stamped border. For plain driveway numbers, see our concrete driveway cost guide.

What makes stamped concrete cost more or less?

Design detail swings the price per square foot the most, the national concrete guide says. One pattern in one color sits at the low end in every guide. Each extra color or border adds labor, and hand-tooled accents add the most.

Size works both ways. A bigger slab costs more in total but often less per square foot. Shape matters too, since curves take more form work than straight edges.

A driveway may need a thicker slab than a patio, and more concrete costs more. Access counts as well. If the truck cannot reach the forms, the concrete gets pumped or wheeled in, and labor goes up.

The ground counts too. Around Monroe, NRCS soil data show firm red clay close to the surface. A sound base and good drainage under the slab add labor before the pour.

Timing matters on a stamped pour. The pattern has to go in before the concrete sets, so a big slab needs a full team. Summer heat makes concrete set faster, which shortens that window. NOAA normals for stations around Monroe count about 38 to 62 days a year at 90 degrees or hotter.

What does sealing and upkeep cost?

A sealer guards the color and the surface. Cost guides advise a fresh coat every 2 to 3 years. Two national guides put sealing by a pro at about $1 to $3 a square foot.

On a 400 square foot patio, that works out to about $400 to $1,200 per coat. Sun fades color over time, and each new coat slows the fading. One guide suggests a sweep and a wash every couple of months between coats.

Does stamped concrete cost less than pavers?

Usually it does, at least at the start. Two national guides put pavers at about $10 to $17 and $10 to $23 a square foot. A basic stamped design starts near $8 to $14. Pavers are set one at a time by hand, so labor runs higher, one national concrete guide explains.

Upkeep tells a different story. Pavers need no sealer, and one cracked paver can be lifted out and replaced. Stamped concrete needs resealing, and a patch is hard to match to the pattern. Georgia Premier Contracting pours stamped concrete, so a stamped slab is what we quote.

How do you get a real number for your project?

Start with the length and width of the area. Then pick a finish, and note any old concrete that has to come out. Ask each quote to spell out the pattern and colors, plus the tear-out and the sealer.

We look at your space and put a free quote in writing. See the stamped concrete finishes we pour, then call or text (770) 743-6706.